Pin Pain! why?

[Strung_hung]

Ok everyone, I am new to the TNT Made by Sal. I have been using 1in 25g in my arm and 22g 1 - 1/2 in my legs.

I was wanting to know why it hurts like a bitch a few days after, only in my leg and my arm it is pretty good?

[thecivilizedanimal]

you massaging the area ? that helps, if you pin with a 23 it will hurt longer,

[hyperlite32]

I would only go with 25g. You can use a longer pin for bigger muscles, but a 1" should be fine for everything. Heat the syringe with hot water, lube the pin before you shoot. Shoot slow and take your time. Massage after you are done.

[thecivilizedanimal]

i meant to edit mine saying the 22 wil hurt longer etc, but i put 23 lol

25's take too long, i got a buddy to get me a bunch of 23's , perfect

[deleteduser0001]

don't understand it myself, prop hurts in my ass but won't bother my bi's, kills my tris but i can't feel it in my quads.

oh well.

[GYMBRAT]

25's take too long, i got a buddy to get me a bunch of 23's , perfect

same- I use 23's for everything, 25 takes too long for this cat.....A-D-D LOL

[giannos]

If your meaning post injection pain, that is quite normal for high concentration gear. SAL is good stuff, never used their TNT but using the Equi-Test right now and I have post injection pain for a few days. Its 450mg/ML

It will get better in time. If it hurts too much ( limiting your workouts ) consider diluting it with some sterile oil

[thecivilizedanimal]

i do my work outs around whatever i'm not pinning, such as bi's got pinned 2 days ago, and previous day , so i waited till today to do work on them ,

[Benny62]

1 1/2" is pretty long for your quads but perfect for your glutes, I found 22 g 1 inch hurt the quads but 23g 1 inch is perfect.

[tiramisu]

So many reasons....

1) BA, BB, EO are solvents if there is a lot of them this can inflame the tissue
2) If the BA is keeping the keeping the solution from crashing, as is sometimes the case in high percentage mixtures it will be drawn into the body first and the powder may crystalize in the tissue.
3) The powder itself may cause inflammation
4) dead bacteria and/or toxins may cause inflammation.
5) bacteria may cause inflammation.
6) you could be allergic to the solvent or the powder.
7) overly shallow intramuscular injections seem to cause inflammation
8) injecting close to a nerve and or through a vein may cause inflammation.

I'm sure i've missed a few.

[cdnsoldier]

So many reasons....

1) BA, BB, EO are solvents if there is a lot of them this can inflame the tissue
2) If the BA is keeping the keeping the solution from crashing, as is sometimes the case in high percentage mixtures it will be drawn into the body first and the powder may crystalize in the tissue.
3) The powder itself may cause inflammation
4) dead bacteria and/or toxins may cause inflammation.
5) bacteria may cause inflammation.
6) you could be allergic to the solvent or the powder.
7) overly shallow intramuscular injections seem to cause inflammation
8) injecting close to a nerve and or through a vein may cause inflammation.

I'm sure i've missed a few.


Good post. Pretty much covers it. And do what Hyoerlit said about "lubing " thepin with the solution.

[thecivilizedanimal]

Good post. Pretty much covers it. And do what Hyoerlit said about "lubing " thepin with the solution.

yeah i try to heat my shot up and let a few drops run down the pin

[IronRobi]

I would only go with 25g. You can use a longer pin for bigger muscles, but a 1" should be fine for everything. Heat the syringe with hot water, lube the pin before you shoot. Shoot slow and take your time. Massage after you are done.

lube the pin? I don't get it?

[Strung_hung]

wow so we all had some issue with hurting body parts, As long as I know that I am fine, I just didn't want to fvck something up.

anyways thanks!

[tex]

lube the pin? I don't get it? if you have to ask...you'll never know.... :)

[Ongeau]

lube the pin? I don't get it?


as soon as I say this your going to go. well of course......

holding the serynge vertical, push the plunger until a slight amount of oils comes out of the pin. let that oil run down the needle and lubricate it.


(Or take some 10w30 and put a dropplet on your finger, and just before injecting your AAS rub the 10W30 all over the needle with your finger. you know grease the shit up so it slides nicely into you. yo can then push it in and out several times an not feel a thing) THIS IS A JOKE. DON"T ****ING DO THIS>

[thecivilizedanimal]

i found 10w30 sucked, it burned.

wd-40 cleans the area up, lubes the pin and dry's nicely, wd40 for lubing all my pins, and i only use 18's, they go in easier , just one push of the p;lunger and its all in

:D

[IronRobi]

as soon as I say this your going to go. well of course......

holding the serynge vertical, push the plunger until a slight amount of oils comes out of the pin. let that oil run down the needle and lubricate it.


(Or take some 10w30 and put a dropplet on your finger, and just before injecting your AAS rub the 10W30 all over the needle with your finger. you know grease the shit up so it slides nicely into you. yo can then push it in and out several times an not feel a thing) THIS IS A JOKE. DON"T ****ING DO THIS>

I find there's more pain when this happens. Stings more breaking the skin. I prefer a clean dry needle

[Big D]

just spit on it a little bit

[Dk]

i think sal tnt is 450mg/ml

expect it to hurt if your vulnerable to injection pain

[kloan]

I find there's more pain when this happens. Stings more breaking the skin. I prefer a clean dry needle

i found this as well... i read that the needles are already lubricated for one time use injections... i forget what its coated with, but its made to assist with easier injections.. though i had a few that got kinda stuck to my skin still when pulling out.