Need help.

[Ritch]

O.k. here`s the question that will most likely have people poke fun at me for time to come. I want to try some t-400 right now to see it I`m allergic but can`t get the oil in the syringe. I feel real stupid asking this, what do I do? For some reason I can get the liquid out of my clen bottle but not the test. The liquid is not comming out, and there is a pressure that`s being created on the plunger. Guys, please tell me how it`s done.

[natenator]

warm the bottle up in a hot water bath. then you'll be good.

[Ritch]

warm the bottle up in a hot water bath. then you'll be good.

I`ll go give that try. Thanks.

[waderow]

make sure youre squirting in air first in equal volume to the oil being removed

[spitfire]

Oh? First what guage needle are you using? I usually draw with a 20 or 22.

Then usually you inject as much air into the vial as you are going to withdraw in liquid. 1ml = 1ml air inject before you withdraw the oil.

[Ritch]

Alright, did the shot, I think it went o.k. I did do a search and read about injecting air into the vial, but didn`t do it. By not doing it, is that why air bubbles entered the vial after? I did aspirate, kinda saw a little bubble come up then just to be sure pulled up again on the plunger and no blood, so I pushed that sucker down. I drew with a 25g and changed the tip and used another 25g 1 inch length in the right upper outer glute. Am standing as I type this... Can feel something was shot there, was surprised how hard I had to push down to get the test in me.

[spitfire]

Heat up the oil a bit. The viscosity is the problem. If you heat it up, it will thin out and be easier to inject.

[Ritch]

warm the bottle up in a hot water bath. then you'll be good.

At first I put a glass in the microwave and the ****er cracked, I thought to myself " Is this a sign not to do this?" Then put hot water in a bowl and let it sit there for a while as I cleaned my hands for a second time then checking my ass in the mirror to make sure I get it right. Did it lying on my side on my bed, good to have a mirrow on the side wall...

[Ritch]

make sure youre squirting in air first in equal volume to the oil being removed

Oh yeah, I did do this, at first before warming the test, it didn`t work, as the pressure was still resistant with the plunger. So didn`t see the need to do it again, but will do it next time.

[kloan]

I drew with a 25g

that's your problem right there.. the other suggestions help, but you should be drawing with 21g.. 25g is too small...

[Born2Juice4Ever]

make sure youre squirting in air first in equal volume to the oil being removed

This is very good!

When heating up the bottle I always introduce a needle into the bottle0----just leave it in, this allows pressure to scape out of the bottle while you heat up the oil.

As a rule of thumb (has been mentioned here), introduce the same amount of air into the bottle, same amount in CCs that you are pulling out, I.E.:

-If you are pulling out 2CCs, then push IN 2CCs of air.



By the looks of it, the bottle did not explode and you already took the shot---I see you're posting again :D :D

Never feel inadequate for asking questions bro, never!!



B2J:ht

[Ritch]

Thanks for the tips fellas. So I did a 200mg shot of test with EO last night around 11:30 and so far have no allergic reactions. Do you think I`m good to go with EO products?

[Born2Juice4Ever]

Trial-error will be your best friend in this one...but so far I think you are fine:)




B2J