FTA Knowledge

[shithead]

Alright I finally entering the world of FTA cause I got stellar deal on an nFusion Nunenio HD receiver.

What does everyone know about FTA right now?

I have heard that the coders havent cracked the N3 codes yet.

I have also heard that the nFusion ppl have cracked the N3 codes, while others tell me that nFusion is running off a sub in the North Pacific. This is why they havent gone down on Dishnet.


Whos running what?

Have you been happy lately?

In the past?

[ironwill]

running a viewsat 2000....had it for 3yrs...love it...The codes havent been cracked for Nagra 3 yet....
2 good sites are
thetotalfta.com
and
ftatalks .com.....
any question you ever dreamed of can be answered there, along with new codes very quick...
good luck....and get off of the free porn, you will go blind....

[Big D]

its not the best time to jump into the FTA world wiht N3 but lucky for you, you have a nfusion receiver. so what i've read is nfusion is still up, its been mixed reviews some say the coders for nfusion cracked the N3 and some say they havent so who knows. and i think nfusion is still up on BEV to. but i'm not 100% sure. i've been using viewsat ultra for 2 years I have no complaints, whenever it would go down, pretty much 12 hours later i would have a new fix. its nice having all the movies and all the channels for free. now i'm just patiently waiting for a new crack for the N3.

I always use ftatalk.com great site

[Redz]

I have viewsat 2000 which is a good box but has been going down alot on dn. I have my inlaws conaxsat box for a few months while they are gone and it never goes down no joke. Nagra 3 will be cracked likely before Dnet even switches too it. FTA will live in. I cant complain having 800 channels.

[Big D]

ya I heard the coders are waiting for dn to switch over to N3 then, they will come out with a new code. dont know if this is true tho

[canadianmuscle0803]

http://www.ftasatellitesource.com

^ great site for up to date programs.

[shithead]

3 months for N3 maybe? I've heard anywhere from 3 weeks to a year.

[hellfish]

I've got an Nfusion Nova and a VS Ultra. Nfusion is the only thing up on BEV right now, minus PPV and Pron. The theory right now is they haven't cracked N3 but are sharing a legit N3 card over IKS for all nfusion receivers. Visit nfusionforum.com for the latest.

Dishnet is up on all others cause it hasn't gone N3 yet.

[lights_out]

N3 will be cracked I figure by January Feb at the latest if its not already cracked not ... as to why it is taking so long to release a fix, how many people subscribe to bell in Canada in comparison to how many people subscribe to dish in the states? Alot more people subscribe to dish in the states so therefore it is going to take longer to switch over to N3. When it does switch viewsat will be the first one up...

[shithead]

I guess NFusion BEV is running from a legit card through the IKS system.

Let you guys know later this week I guess.

[trykillthis]

I got Viewsat Ultra. I don't think we will see a N3 fix for BEV until dish is all switched over. Dish is the main market. Just spin your sat to dish until then. I honestly don't watch BEV very often. Only back before the N3 thing when dish would go down. Good to have both up for the UFC's just in case.

[shithead]

Well, the nfusion Nuvenio HD works almost flawlessly. I get all of BEV except the PPV channels, but the playboy channel and a venus channel. The NFL Sunday Ticket and NHL Center Ice. Only a few BEV HD channels dont work.(4-5)

All of Dishnet works including the video on demand.(PPV)DN also includes NBA League Pass and the Big 10 college basketball package.

[NorthOf60]

I have a buddy that has a Viewstat and he loves. No real XP here though. I love it when I go to my buddies place to watch though. I would have one but the landlord won't allow Dishes to be put up.

[piller01]

heres a great site for all your fta needs www.ftabins.net heres some thing for ya..NFusion Complete Instructions for Wireless Ethernet Bridge Setup COMPLETE INSTRUCTIO
NFusion Complete Instructions for Wireless Ethernet Bridge Setup COMPLETE INSTRUCTIONS FOR WIRELESS ETHERNET BRIDGE SETUP

The following procedure is to get the Ethernet Bridge ready to use in bridge mode. This procedure must be performed by the customer because every wireless home network has some unique properties. During this procedure, you will be hooking the Bridge up to your computer to manually make changes to it's software. To do so, the following step-by-step instructions will guide you on how to make changes to your PC to communicate with the bridge, how to customize the bridge to your network, and finally, how to reset your computer to its original condition. These instructions should take approximately 15 minutes to complete.

1. Connect the wireless bridge to your computer with an Ethernet cable and plug it into a power outlet. Note: we will not be hooking the bridge up to the router during this procedure, only the computer and the Ethernet enabled device you wish to add to your wireless network.
2.
A) FOR WINDOWS XP, go to your Local Area Connection properties. (Start - Control Panel - Network Connections - Right click Local area connection and choose properties.)
B) FOR WINDOWS VISTA, go to your Local Area Connection properties. (Start - Control Panel - Network and Sharing Centre.)To access the connection properties, click on VIEW STATUS next to the local connection and click on properties.
3.
A) FOR WINDOWS XP,Double click on internet protocol (TCP/IP)
B) FOR WINDOWS VISTA, Double click on internet protocol version 4.
4. Set your IP Address to 192.168.1.20 and your subnet to 255.255.255.0 by enabling radio button "use the following ip address"
5. Click OK to exit the TCP/IP Properties window, then click OK again to exit the Local Area Connection properties window and save your changes.
6. Open Internet Explorer Browser and in the Address bar type 192.168.1.253 to
access the Ethernet bridge settings. NOTE: YOU WILL NOT HAVE INTERNET ACCESS AT THIS TIME, AND UNTIL ALL STEPS ARE COMPLETED.
7. Enter the user name and password when prompted. (Your user name and password are written on the bottom of the Ethernet bridge.)
8. Click on the "LAN Settings" menu item on the left hand side.
9. Some routers use a number other than 1 in the 3rd octet of their ip address. Example: 192.168.2.x . If your router uses a 1, then proceed to step 14, otherwise continue to the next step.
10. On the LAN Settings screen change the bridges IP address to the same range as your wireless routers IP range. (The bridge IP is 192.168.1.253 by default, so for example, if your wireless routers IP address is 192.168.2.1, then your would want to change the number in the 3rd octet to 2, making your Ethernet bridges IP 192.168.2.253)
11. Click apply changes, this will disconnect you from the bridge.
12. Follow steps 1 - 4 again, substituting the new IP range instead. (For example, if you
changed the bridges IP to 192.168.2.253, then you will want to change your Local Area Connection IP to 192.168.2.20 instead of 192.168.1.20)
13. Open the Ethernet Bridge's configuration page again in Internet Explorer (like in step 6), by using it's new IP address.
14. Click on the "Wireless" menu on the left, and choose "basic settings".
15. Click on the drop down menu for MODE: and select CLIENT.
16. Click on apply changes, and when the page reloads, click on "OK" to continue.
17. Click on the Site Survey button and a new page will appear in a new instance of Internet Explorer.
18. In this new page, click on REFRESH, your wireless network should show up in the list. If you are using security for your wireless network, skip ahead to step 24.
19. Select radio button for your wireless network in the far right column and then click connect. When the page reloads, click "OK" to continue and close this smaller page when it reloads with your network site survey.
20. Click the "apply changes" button at the bottom. When the page reloads, you may close the Internet Explorer.
21.
A( FOR WINDOWS XP, go to your Local Area Connection properties. (Start - Control Panel - Network Connections - Right click Local area connection and choose properties.)
B(FOR WINDOWS VISTA, go to your Local Area Connection properties. (Start - Control Panel - Network and Sharing Center.) To access the connection properties, click on VIEW STATUS next to the local connection and click on properties.
22.
A( FOR WINDOWS XP, Double click on internet protocol (TCP/IP)
B( FOR WINDOWS VISTA, Double click on internet protocol version 4.
23. Click the radio buttons for "obtain ip address automatically" and "obtain dns server address automatically". Click OK at the bottom to close this window, and repeat for the next window.Your Ethernet bridge is now setup to be used. Windows Vista may need to be rebooted if you would like to test the bridge with your PC, otherwise, disconnect the bridge from your computer and plug it into the target device. Remember to power off the device before hooking the bridge up to it and powering the bridge up.This Section is for those that have a secured Network:
24. On step 18, when you clicked Refresh, it should show your wireless network.Here it will tell you what type of encryption you have. Make a note of this and close this new browser.
25. On the main setup screen to the left, click on the security menu. Choose the type of security you are using for your network. (WEP, WPA, ETC.)
26. If your security type is WEP, click on the "Set Wep Key" button and fill in all relevant information, save it and close the pop-up browser. If using any other security type, fill in your pass phrase or security code in the main explorer and click apply.
27. Go back to the Wireless Basic Settings page and click on the Site Survey button and a new page will appear in a new instance of Internet Explorer.
28. In this new page, click on REFRESH, your wireless network should show up in the list.
29. Select radio button for your wireless network in the far right column and then click connect. When the page reloads, click "OK" to continue and close this smaller page when it reloads with your network site survey.
30. Click the "apply changes" button at the bottom. When the page reloads, you may close the Internet Explorer.
31.
A ( FOR WINDOWS XP, go to your Local Area Connection properties. (Start - Control Panel - Network Connections - Right click Local area connection and choose properties.)
B ( FOR WINDOWS VISTA, go to your Local Area Connection properties. (Start - Control Panel - Network and Sharing Center.) To access the connection properties, click on VIEW STATUS next to the local connection and click on properties
32.
A ( FOR WINDOWS XP, Double click on internet protocol (TCP/IP)
B ( FOR WINDOWS VISTA, Double click on internet protocol version 4.
33. Click the radio buttons for both "obtain ip address automatically" and "obtain dns server address automatically".Your Ethernet bridge is now setup to be used. Windows Vista may need to be rebooted if you would like to test the bridge with your PC, otherwise, disconnect the bridge from your computer and plug it into the target device. Remember to power off the device before hooking the bridge up to it and powering the bridge up.


IF THIS HELPS YOU THEN PLEASE -/+

[piller01]

DN CEO Says Nagra3 in 2009



According to an interview on November 10, 2008, DN will only start implementing Nagra3 in smaller packages in the first quarter of 2009, likely the international packages. Full implementation will not likely be until this time next year. Of course by then a great deal will be missing.

Charlie E

"It's hard -- I can't predict piracy. I don't think we are in a position in the fourth quarter to have an impact on it. I think it will be a first quarter next year before we started having an impact and it will be this time next year before we totally are secure

[shithead]

what are you running?

I hope to hell we'll get the UFC tonight, I have heard that we will get it on channel 472 on echo* 3 at 61.5 W

Hope that we get DN until at least the summer '09 before we start losing good stuff.

[ironwill]

ufc is available via streaming video, im trying to find it...dammit....if anyone sees, please post..

[Descimus]

bump i would like to watch it tonight in streaaaaammm^^

[Descimus]

http://wrestlinglivetv.*********/livestream.htm
there the fights should air on this.

[piller01]

what are you running?

I hope to hell we'll get the UFC tonight, I have heard that we will get it on channel 472 on echo* 3 at 61.5 W

Hope that we get DN until at least the summer '09 before we start losing good stuff.

just a captiveworks 600 premium i'll wait for the n4 change over till i get fancy.....

[shithead]

smart decision, I may be out $400 if the Nuvenio HD cant make the switch :(

[piller01]

smart decision, I may be out $400 if the Nuvenio HD cant make the switch :(

from what i have read most units should be fine yours i wouldn't worry about it's the cheaper ones that might not cut it.....

[Anatomy]

anyone have any info on the best [read easiest way for noobs] way to redirect a BEV dish to charlie?

[rated_rko]

i cant wait for n3 to be cracked

[piller01]

anyone have any info on the best [read easiest way for noobs] way to redirect a BEV dish to charlie?

http://www.dishpointer.com/ this is the best pointer ever......

[Anatomy]

wow, that is a great tool

I was hoping it would be as simple as loosening 1 bolt and rotating the dish until the porn comes back but it looks like it will be a full-on event. I will probably hire someone who knows what they are doing.

Thanks

[piller01]

it is really easy go to www.ftabins.net then find the tools section then find out what settings you need for your dish i found 110 charlie in 5 mins.....

[macka]

I have both 110 Cand 119 locked in and playing

[shithead]

I have both 110 Cand 119 locked in and playing

ya I pointed mine at 61.5, now I'm going to get an elliptical and hit 110 and 119 as I only got the UFC in SD on 61.5

[macka]

I have 2 round dishes single LNB, don't have to worry about skew

[Anatomy]

how do you tell what direction to point the dish? elevation and skew seem easy since the numbers are marked on the adjustment slots, but how do you know where to aim it left to right? Regular compass?

How precise does it need to be?

[piller01]

how do you tell what direction to point the dish? elevation and skew seem easy since the numbers are marked on the adjustment slots, but how do you know where to aim it left to right? Regular compass?

How precise does it need to be?

use a compass it's really easy.....

[shithead]

Once ya get onto it, its really a breeze.

[Anatomy]

shit now I have to find a compass

[macka]

shit now I have to find a compass


try crappy tire

[RagingRandy]

Bump for newest info

[cdnsoldier]

Last Viewsat bin has lasted ages and ages.

[RagingRandy]

I thought there was a new encryption coming out or was out.

[piller01]

I thought there was a new encryption coming out or was out.is this for n3 is so no nothing will come out until dish goes full n3....I'll hunt around for you and see what i can find....

[RagingRandy]

What is currently available for channels? I am not a big TV watcher. I am just sick of Bell and want to get my own setup going. I was looking at buying and HD PVR anyway.

Thanks