non-micronized suspension

[deleteduser0001]

I bought a few bottles of (didn't know at the time) non-micronized suspension. It will clog an 18g needle if undiluted. Its a few years old now but still not expired, last time I attempted to use it, I diluted 1/2cc with a full 2cc's of oil and it still clogged.

What else can I do with it? can I somehow evaporate the liquid and remix it into a oil solvent? I have 120cc's of it and am not interested in wasting it.

[Kilburn]

I bought a few bottles of (didn't know at the time) non-micronized suspension. It will clog an 18g needle if undiluted. Its a few years old now but still not expired, last time I attempted to use it, I diluted 1/2cc with a full 2cc's of oil and it still clogged.

What else can I do with it? can I somehow evaporate the liquid and remix it into a oil solvent? I have 120cc's of it and am not interested in wasting it.

120ccs? lol. fail.

[St]

I put b-12 with my test suspension back in the day when i could get real vet stuff.I put 1cc of b-12 with 1 cc of test suspension,but went as high as 2ml.

[BDH]

U have had the same problem many times... to solve the problem, I do mix with oil, but you have to make sure the needle is angled upward during injection, so the oil remains higher and keeps the flow...

[deleteduser0001]

120ccs? lol. fail.

very helpful, please go kill yourself.

to everyone else, the oil methods (even angled up) does not seem to work, so I was more intrested in getting it converted somehow, is that possible or is b12 the standard solution to fix this problem?

[Monka]

not sure with suspension, but some have oil in pin and heat up the suspension. not sure as never tryed but heard if you heat will help a bit. i remmeber in old days, winny like that, snowball in 18ga pin, just a pain in ass, worked well , (when i could get to inject" but **** was such a pain i just drank it after a while, winny that is... not suspenion, hopefull others have insite on this

[Kilburn]

very helpful, please go kill yourself.

to everyone else, the oil methods (even angled up) does not seem to work, so I was more intrested in getting it converted somehow, is that possible or is b12 the standard solution to fix this problem?

relax. i just dont understand why you would buy so much of it without testing it first.

[nisser]

I bought a few bottles of (didn't know at the time) non-micronized suspension. It will clog an 18g needle if undiluted. Its a few years old now but still not expired, last time I attempted to use it, I diluted 1/2cc with a full 2cc's of oil and it still clogged.

What else can I do with it? can I somehow evaporate the liquid and remix it into a oil solvent? I have 120cc's of it and am not interested in wasting it.

Are you still trying to use the same bottle?

The #1 mistake people make with using suspension is not mixing it well before withdrawing it. Then each subsequent withdrawal is more and more concentrated and it starts clogging up.

If this doesn't apply to you, then I don't know then but it not going through 18g seems very weird. What lab?

[deleteduser0001]

Are you still trying to use the same bottle?

The #1 mistake people make with using suspension is not mixing it well before withdrawing it. Then each subsequent withdrawal is more and more concentrated and it starts clogging up.

If this doesn't apply to you, then I don't know then but it not going through 18g seems very weird. What lab?

I tried heating it again last night, still no go. I really don't want to use it as a suspension anymore, would rather some advice on how to change it into an oil if possible.

thanks

[nisser]

I'm not sure that you can do that. The test in suspension is without ester and oils use esterified hormone. You can give it a try by dehydrating it and then prepare it in oil but there's no guarantee that it will work and it's probably more trouble than it's worth.

[gsxr750]

.