congealed Test Cyp?

[666conducer]

So i got some test cyp from a UG i've never heard of before (my buddy states it's good lol) Anyways, yesterday i was ready to start my cycle and its thickened and cloudy. I'm not sure if this is a reputable name or some yahoo cooking in his kitchen sink but has anyone encountered this?

[ironwill]

cloudy, or crystallized???I havent seen cloudy, that doesnt sound healthy....Crystals appearing are needed to be re-heated and they dissappear, it is from the BA, or BB crashing the test....
if cloudy i wouldnt stick it in my epidermis, no way, no how....
crystallization is a different story..

only utilize reputable sources guys, and girls...you are injecting substances into your body......scary...
I wouldnt inject a compound i came across, that i never heard of...There are plenty of reputable posts of good sources right on this board....Why would you use something you have never heard of.....that is crazyyyy..
Health first, look funny with abcesses etc on your body, and indents from where they were cut out....OR WORSE...

[666conducer]

i do believe its cloudy FROM being crystalized lol.....would re-heating it work?

[ironwill]

if it is crystallized, yes reheating brings it back to a non-crystallized state....But cloudy is different than crystalline...Big difference..

[666conducer]

yeah i might turf it......i've never heard of this brand before and i get paranoid about what i put in my body

[Big D]

whats the labs name ??? and ya theres a big noticeable difference between crystals and cloudy

[666conducer]

am i allowed to post the lab name?

[Seth]

I read somewhere that it can come from moisture in the powder used. If you heat it up and the cloudiness disappears, it would support this theory. That being said, the fact that the lab uses that kind of poorly handled powder speaks for itself

[666conducer]

i googled the name and found nothing.....which also may be a good thing as well

[666conducer]

oh, its definitely cloudy as well

[Big D]

ya your allowed to post the name

[Big D]

I read somewhere that it can come from moisture in the powder used. If you heat it up and the cloudiness disappears, it would support this theory. That being said, the fact that the lab uses that kind of poorly handled powder speaks for itself

thats for tren, i dont know if the same applies for cloudy cyp

[666conducer]

it's called xxx. It's new around my parts and no one has heard of it and the guy who's selling it is far from reputable so i wouldn't be surprised if it was bunk

[kloan]

Isn't xxx? I thought they were supposed to be good... maybe you can post a pic in the pic section and someone who's familiar with the label can verify if it's legit... cloudy doesn't sound good though.

[666conducer]

i'm not sure if it's called xxx...it may have even been good when it arrived but i wouldn't put it past the guy selling it to dilute it even to make a $$$

[Big D]

it's called xxx. It's new around my parts and no one has heard of it and the guy who's selling it is far from reputable so i wouldn't be surprised if it was bunk

xxx is good to go man, that labs has been around for a while. its still possible you have a bad batch but I highly doubt it. do you trust the source? he might be switching the gear on you.

[Big D]

does it look like this ?

sorry if i'm not allowed to post pics in this section, MP please delete.

[666conducer]

xxx is good to go man, that labs has been around for a while. its still possible you have a bad batch but I highly doubt it. do you trust the source? he might be switching the gear on you.

Nope, i don't trust the source at all but times are tough lol......i might have to go international

[666conducer]

my brother's been on the same stuff (test cyp @ 750mg/week) for 6 weeks and isn't feeling nothing....BUT it's clear :)

[Amoral]

Hey dude, the pic Big D posted... I've done their Cyp before, and it wasn't cloudy, but you can see size difference in my pics in the pic section. Honest to God, I didn't really start feeling it for a while and didn't get comments until around wk 8 and onward. All the best man, and I hope everything works out for you and your bro.

[666conducer]

Hey dude, the pic Big D posted... I've done their Cyp before, and it wasn't cloudy, but you can see size difference in my pics in the pic section. Honest to God, I didn't really start feeling it for a while and didn't get comments until around wk 8 and onward. All the best man, and I hope everything works out for you and your bro.

AWESOME progress Dude! Yeah, i've done test C and E many times and it hits me around week 6. I'm more concerned over the quality of the gear itself which from feedback here must be good so it might be MY source me thinks. I do appreciate the info though Bro's!

[Mr Ontario]

K why hasn't he comment as to whether the pic posted is the stuff he is using or not? kind of fishy to me!

[kloan]

why I suggested posting pics of his in the pic section first...

[666conducer]

can i take a pic and post it?

[666conducer]

Here is the other vial i have.......looks the same from what i saw

[Amoral]

Same stuff I had, brah. Again, hope everything works out well for you guys, and I hope some douchebag isn't jerkin you around

[pseclint]

I highly doubt you would have any problem with xxx stuff..... if there is a problem and it is really xxx stuff notify the lab rep, but i gaurentee that xxx would never send out cloudy or questionable gear..... best of luck

[gsxr750]

What's lot and expiry?

[BolicPower]

if it's real just heat it,, and imo get a sterial bottle and get a .45 syringe filter and pour into new vial, some gear crystalizes and some clouds same shit diffrent day it's separating from the solvents. but try heating a bit then let sit then heat and sit and lol so on...ive seen gear both cloudy and some thick like glue
OR if you had access to some BB/ba just add a bit more BA and BB and heat for a bit and you should be fine after heating and filtering, we have sponcers that carry all you'd need, cyp needs more Ba/bb any ways due to melting point being hight then enth.
Or after posting this lol i'm sure you'll get a PM with help. I dont' use em but they seem to honour shit that happens and fixes. Shows you how much i know then, i thought xxx said xxx on it, not some longer name. haha, my bud used to carry around 4-5 UGs and i dont remember that but i swore he said he carried xxx and couple others. i THINK xxx. just that picture didnt' seem familuar, but who holds bottles in open for everyone to see?..haha

[BolicPower]

You know now that i think of it also, where you store can play i big role, if it's damp, this will cause moisture, i had some gear in my basement floor and some in bedroom drawer and the one in the basement ****ed up. Not sure if due to the moister

[hyperlite32]

I have heard nothing but good things in regards to all xxx products. If you got it from a trusted source who knows there stuff, Heat it up, see what happens. If you got it from some scum-bag, and you even think he "might" have tampered with it, I wouldnt shoot it. Get your money back. Or see if he will take a shot of it....

[666conducer]

Well it's good to know that it's reputable.....i guess my source may not be then. I think i'll err on the side of caution and toss it and try to find a new source. The last thing i want is an abscess or worse. Thanks for all the input though guys.

[xxSCHiSMxx]

xxx is good to go. Put vial in oven @ 250 w/ needle to vent gas, if cloudiness goes away, chances are moisture/water.

I also had probs w/ cyp crashing, heat if up, swirl it around, see if it clears up.

[gustavo77]

Just boil some water in a small pot, remove from heat, soak the vial in there for about 5min and then take the vial out and shake it for a few minutes in a towel (safety first..lol). If the gear is crashed it should go back back into the solution, if not, then it is shit...don't use it...

[piller01]

Just boil some water in a small pot, remove from heat, soak the vial in there for about 5min and then take the vial out and shake it for a few minutes in a towel (safety first..lol). If the gear is crashed it should go back back into the solution, if not, then it is shit...don't use it...

that was very nicely put lmao....

[gustavo77]

that was very nicely put lmao....

That's what i did with some xxx tren E i got....went back into the solution, held and was some of the best tren i have ever used...sometimes the ratio is slightly off and some of the batch does not hold initially. I remember looking at that vial and saying, "at least i know there is hormone in there". A ten ml vial that looked like someone blew their wad in there...went back into the solution though and gave me some awesome gains...hooray for crashed gear!!!

OK, i need some sleep now...lol.. Trying having a kid sometime if you do not like to sleep...

[piller01]

That's what i did with some xxx tren E i got....went back into the solution, held and was some of the best tren i have ever used...sometimes the ratio is slightly off and some of the batch does not hold initially. I remember looking at that vial and saying, "at least i know there is hormone in there". A ten ml vial that looked like someone blew their wad in there...went back into the solution though and gave me some awesome gains...hooray for crashed gear!!!

OK, i need some sleep now...lol.. Trying having a kid sometime if you do not like to sleep...

oh i know what that is like just wait my friend till shes at least 11...

[gustavo77]

oh i know what that is like just wait my friend till shes at least 11...

I can wait bro...one day at a time... i am still awake..lol..

[thundercat900]

Ive been around alot of xxx test and other injectables lately and its all been really clear.. No problems.. Although your lables look legit from the pic I see.. Can you show a better pic of the cloudy stuff?