PDA

View Full Version : unable to draw from hcg vial?



L3
22-07-2010, 10:14 AM
i had one vial of chinise HCG left, mixed in my BW and used half the vial no problem. been using the regulation size orange capped slin pins to draw.

last week, with a good .5cc/2500iu of liquid left in the vial, i was not able to draw out anymore product with the pin.

i tred 4 different slin pins, tried inj a few CC of air in the vial b4 drawing- nothing

i used a 25ga 3cc barrel.. again NOTHING would get drawn out

ended up pitching the stufff



can anyone exlplain what happened??

bigtavi8
22-07-2010, 10:21 AM
Whats up with that L3. Just used similar stuff with those same pins and it flew up there easily all the way to the last ml. It actually drawed a lot easier than i thought. Im not sure on this one man.

Baconbits
22-07-2010, 10:26 AM
I found that I had the same problem when I was using slin pins, 8mm (5/16) in length...the length wasn't long enough to get past the rubber stopper in the vial unless you got it exactly in the middle of the stopper...and even then it was crappy. I switched to a longer slin pin 12.7mm (1/2") and now I don't have that problem anymore.

L3
22-07-2010, 10:27 AM
oh trust me i put that shit dead center, with 4 pins... id like to think i know what im doing

weirdest thing ever, and eeven weirder when the 25ga wouldnt suck up anything, as i could clearly see the needle submerged in the liquid

bigtavi8
22-07-2010, 10:30 AM
See now that part doesnt make sense. Once the reg pin was in the oil thats really messed up it didnt draw it. Could the vial have lost pressure or something. But i rememeber you sed you even tried putting a couple mls of air to pressurize it.

ironwill
22-07-2010, 10:31 AM
Is it possible the rubber was soft and got sucked into the tip as you injected it into vial....Or did you try and suck the air in after the needle was extracted to see if plugged

L3
22-07-2010, 11:41 AM
nope, the pin was clear of any debris... i was f'kin pissed too...my recent incrased sexual activity has left me ummm drained? pun intended.... now i have to wait for the doc to give me more....sigh

guest
22-07-2010, 11:43 AM
have you also been noticing repeating numbers on a daily basis? like every time you look at the clock it says 11:11?

Big D
22-07-2010, 11:43 AM
just a suggestion, to prevent this from happening, maybe if you pre-load 1ml 5000ui in a syringe and keep that in the fridge, that way you dont have to worry about loading up each time.

Mr Ontario
22-07-2010, 09:49 PM
lol good one cuz :)


have you also been noticing repeating numbers on a daily basis? like every time you look at the clock it says 11:11?

St
26-07-2010, 11:04 AM
I use 23 guage needles only never a problem.

greatwhitepike
27-07-2010, 10:34 PM
just a suggestion, to prevent this from happening, maybe if you pre-load 1ml 5000ui in a syringe and keep that in the fridge, that way you dont have to worry about loading up each time.

Whoa, I mix 5000 iu with 10ml my eyes are not good enough to have so much in 1 ml.



I use 23 guage needles only never a problem.

Is that not overkill for sub Q injects!?

Here is my suggestion next time it happens: cut the metal off the top of the vial and pop the top off. suck out the rest of the solution with a syringe and put it in a new sterile vial.